What is the operating method of the cable fault tester?
2024-04-29 16:57:00 Source： Hits：
What is the operating method of the cable fault tester? The host of the cable fault tester is used to measure the nature of the cable fault. Need to use the path meter to determine the underground direction of the cable. The basic method of power cable fault testing is to apply high-voltage pulses to the faulty power cable, which will cause a breakdown at the cable fault point. When the cable fault breakdown point is discharged, electromagnetic waves and sound are generated to the outside. Let the high-resistance fault point of the cable puncture and arc. At the same time, a low-voltage pulse for measurement is added to the test terminal. When the measurement pulse reaches the high-resistance fault point of the cable, it encounters an arc, and the appearance of the arc is reflected. Since the high-resistance fault becomes an instantaneous short-circuit fault during arcing, the low-voltage measurement pulse will have a significant impedance characteristic change, making the waveform of the flashover measurement into a low-voltage pulse short-circuit waveform, making the waveform discrimination particularly simple and clear. This is the so-called secondary pulse method. The reflected waveform of the received low-voltage pulse is equivalent to a waveform where the core is completely short-circuited to the ground. The low-voltage pulse waveform obtained when the high-voltage pulse is released and when the high-voltage pulse is not released are superimposed, 2 The waveform will have a divergence point. This divergence point is the reflected waveform point of the fault point. This method combines low-voltage pulse method and high-voltage flashover technology to make it easier for testers to determine the location of the fault point. Compared with traditional testing Compared with the method, the working principle of the application of arc reflection method (secondary pulse method) in cable fault location: First, a high voltage pulse with a certain voltage level and a certain energy is applied to the faulty cable at the test end of the cable. The second pulse method is advanced However, the complex waveform in the impulse high-voltage flashover method is simplified to the simplest low-voltage pulse short-circuit fault waveform, so the interpretation is extremely simple, and the fault distance can be accurately calibrated.
WeChat
15388193573
