Product introduction of lightning protection component tester
The lightning protection component tester is suitable for testing the DC parameters of overvoltage protection components such as zinc oxide arresters (varistors), cermet two- and three-electrode discharge tubes, and vacuum lightning protection guans.
Another name for lightning protection component tester
Lightning protection component tester, lightning protection component tester, lightning protection component measuring instrument
Other indicators
Insulation resistance 6MΩ(500V)
Withstand voltage AC1.5kV 50HZ 1min
Working temperature and humidity 0~+40℃,≤85%RH
Storage temperature and humidity -10℃~+50℃, ≤90%RH
Power supply DC12V dedicated power supply (core + pole)
Power consumption 8W
Instrument size 208×190×78mm3
Weight ≤1kg
Product features of lightning protection component tester
1. It is suitable for the measurement of DC parameters of overvoltage protection components such as zinc oxide surge arresters (varistors), cermet two- and three-electrode discharge tubes, and vacuum lightning protection guans. It can also be used as a stabilized, constant current power supply, used in other areas
2. It has the functions of high-voltage short-circuit protection, over-current protection, high-voltage preset, range adjustment, etc., and the high-voltage self-discharge time is less than 0.5 seconds
3. With self-check function
4. The measurement data is displayed by three and a half digits LCD digital, with high accuracy and good reliability
5. During measurement, the range can be set in advance, and an audible prompt will be issued for the over-range test during the measurement process, which is suitable for device grouping and inspection discrimination
6. Select continuous measurement, which can test batches of samples without interruption
7. The panel function of this lightning protection component tester is simple and easy to operate
8. Light weight, easy to carry