The RCWS-106C automatic trace moisture analyzer is a newly developed trace moisture measurement and analysis instrument. The instrument uses a high-resolution color touch LCD display, which is convenient, intuitive and easy to operate. The instrument uses a high-performance ARM processor with large data storage capacity, fast and stable operation and excellent anti-interference performance. It has the outstanding advantages of fast detection speed and high accuracy. The instrument has a fault self-diagnosis function. When the test is over, the measurement result will be displayed and printed. The instrument has the function of measuring potential dynamic curve indication, which makes the test state more intuitive; the instrument has a large data storage capacity and can store up to 1000 data records; the instrument has a delay measurement function, which is very effective when testing samples with lower moisture content; the instrument adopts Sliding touch control stirring speed; the moisture content calculation formula contains a variety of calculations based on key parameters such as volume and weight; during the test, if you need to modify the relevant parameters of the calculation formula, you can modify it in time without affecting the moisture determination results , The moisture content is calculated according to the newly revised parameters, which is convenient for users.
The instrument adopts Karl Fischer Coulometric titration method, which can reliably determine trace moisture in liquid, gas, and solid samples. When testing, for solids that are insoluble in reagents and substances that easily contaminate electrodes and reagent reactions, it can be equipped with corresponding solid, gas, and liquid samplers for indirect measurement. It is a highly efficient and fully automatic analytical instrument. It is widely used in electric power, petroleum, chemical, pharmaceutical, railway, environmental protection, scientific research institutions and other industries.
technical parameter
Titration method: Coulometric titration (coulometric analysis)
Measuring range: 0ug～200mg (typical value 10ug～100ug)
Sensitivity threshold: 0.1ug
Accuracy: 3-1000ug ±3ug, no more than ±0.2% above 1000ug (not including sampling error, environmental humidity error)
Sample type: solid, liquid, gaseous
Display mode: 64K color high-definition touch display
Data storage: 1000 test records
Status indication: dynamic curve, text display
Stirring speed adjustment: Sliding touch panel speed adjustment
Date and time: The real-time time of normal operation after ten years of power failure
Printer: Mini thermal printer, paper width 56mm
Power supply: AC 220V±10V, 50Hz±2.5Hz
Power: 50VA
Use environment temperature: 5～35℃
Use environment humidity: ≤85%
Dimensions: 330mm X 260mm X 220mm (length x width x height).
Mobile version
15388193573
